Flowserve URB 1 - Manual (Page 28)

28
Basic Settings
– continued –
Visual display / Parameterisation of bus devices
– continued –
Press button briefly to enter the error
messages window.
For more information please refer to
section Malfunction, Troubleshooting,
Fault Finding List on pages 72 and 74.
Press button briefly to return to the
main window.
In this example only the bus device
NRS 1-42 is displayed.
If the node IDs of the bus devices
NRS 2-40 and NRR 2-40 have been
established such that the equipment can
be displayed on the URB 1, the
indication of these devices will take
priority over the NRS 1-42 and the
display window of the NRS 1-42 will be
blanked.
Press button briefly to enter the
parameterisation mode for the following
settings:
■ Relay energizing delay times
■ Relay de-energizing delay times
briefly
briefly
briefly