Flowserve URB 1 - Manual (Page 45)

45
Basic Settings
– continued –
Adjusting conductivity controller
Press button twice briefly to activate
the line editing mode.
Use button or to scroll back and
forth through the lines.
The split-screen main window shows
which GESTRA bus devices can be
indicated:
■ High-level limiter NRS 1-41
■ Low-level limiter NRS 1-40
■ Level switch NRS 2-40
■ Level controller NRR 2-40
■ Conductivity controller LRR 1-40
Press button twice briefly to enter the
parameterisation mode for the following
settings:
■ µS/cm or ppm
■ Indicating range of actual value graphics
■ Max. conductivity
■ Setpoint
■ Min. conductivity
flashing
twice briefly
twice briefly