beautypg.com

Remove actuator from mounting adapter – Flowserve QX Limitorque User Manual

Page 15

background image

15

Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11

flowserve.com

3

Remove Actuator from

Mounting Adapter

3.1 Actuator Removal with Type B4/B4E Base (Torque)

3.1.1 Removal (Type B4/B4E Base)

Step 1

c

WARNING: Hazardous Voltage! Turn off all power sources to actuator before removing actuator from mounting

plate. Power sources may include main power or control power. If necessary, disconnect incoming power leads
L1, L2, L3, and control wiring from the terminal block.

Figure 3.1 - Torque Nut, F/FA-10, QX-1 & 2 and F/FA-12 and -14, QX-1 thru 5

See also other documents in the category Flowserve Hardware: