2 product identification, 1 initial inspection and recording suggestions – Flowserve QX Limitorque User Manual
Page 11
![background image](https://www.manualsdir.com/files/784869/content/doc011.png)
11
Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11
flowserve.com
2.1.3 Unit Weights
Table 2.2 - QX Unit Weights
Unit
lb.
kg
QX-1
40
18
QX-2
42
19
QX-3
80
36
QX-4
80
36
QX-5
80
36
NOTE: Weights include B4 stem nut and lubricant.
2.2 Product Identification
2.2.1 Initial Inspection and Recording Suggestions
Upon receipt of the actuator, several steps should be initially followed to ensure condition of equipment and to
establish proper record keeping.
1. After removing the actuator from the shipping carton or skid, thoroughly examine it for any physical damage
which may have occurred during shipment. If you note any damage, immediately report the damage to the
transport company and call Limitorque for further assistance.
2. A nameplate with important information is attached to each actuator. Record the following information for use
when you need to contact Limitorque with any questions about your actuator:
• Unit type/size
• Flowserve Limitorque order number
• Serial number
Figure 2.2 - QX Nameplate
Figure 2.3 - QX Nameplate