ETA E20.321 - Manual (Page 29)

29
7.7.2 Measuring the total time with intermediate time
reading (SPLIT or fly-back hand)
This function allows, for example, the total duration of a race
and the individual time taken by each individual runner to be
measured.
– START of timing by briefly pressing button A.
– SPLIT X of timing by briefly pressing button B when runner
X finishes.
In the example opposite (SPL'), the time taken by runner X
is 0 hour, 3 minutes, 40 seconds and 85 hundredths of a
second.
– RESTART timing by briefly pressing button B.
The chronograph flies back to the time passed since Split X
and continues measurement (CHR').
– SPLIT Y of timing by briefly pressing button B at the finish
of runner Y (SPL').
– RESTART timing by briefly pressing button B. The chrono-
graph flies back to the time passed since Split Y and con-
tinues timing (CHR').
– STOP Z by briefly pressing button A. Reading time of last
runner Z and the total race time: 0 hour, 5 minutes, 20 sec-
onds and 56 hundredths (Add').
– Reset by briefly pressing button B (CHR').
MDE E20.321-GB.fm Page 29 Mardi, 4. fÈvrier 2003 10:43 10