ETA E20.321 - Manual (Page 27)

27
7.6.2 Setting the calendar-alarm function
Pull the crown to position 2.
Briefly press button B to select and flash the figures of
the hours, minutes, date , month and year succes-
sively. New date is set by turning the crown and con-
firming by briefly pressing button B.
The new date for the annual alarm (AG) is confirmed by
pushing the crown back to position 1 and confirmed by
the appearance of the "ON" message.
In the example opposite, the calendar-alarm will be
programmed to 29/01/99 at 12:00.
Push the crown back to position 1: the alarm is auto-
matically switched on (ON)*.
* The calendar-alarm will only be switched on if the
date you have programmed is a date in the future.
* There will be no ON display if the date you have
entered is in the past.
The alarm sound is stopped by pressing one of the but-
tons or the crown.
Pressing and holding button A activates
(ON) or deactivates (OF) the calendar-alarm.
Alarm
ON/OFF
MDE E20.321-GB.fm Page 27 Mardi, 4. fÈvrier 2003 10:43 10