ETA E20.321 - Manual (Page 19)

19
7.2 Setting the time T1
Select the T1 (TIME) function by turning the
crown, then pull it to position 2.
7.2.1 Selecting the 24 hour or AM/PM mode
The digital time (figures) can be changed to
display in either 24 hour or AM/PM mode by
briefly pressing button A.
7.2.2 Setting the digital hours, minutes and
seconds
Press button B briefly; the hour, minute and
second figures are selected and will flash
successively.
The hour, minute and second figures can be
successively adjusted by rotating the crown.
Push the crown back to position 1 after adjust-
ment.
MDE E20.321-GB.fm Page 19 Mardi, 4. fÈvrier 2003 10:43 10