ESI Audioterminal 010 - Manual (Page 19)

20
4. 25pin Dsub-TDIF/R-BUS Connection port
In this port, you can connect TDIF and R-BUS format. You can select it on the Audioterminal 010
control panel.
- You can connect external devices that adapting TDIF format from TASCAM via this
port. It’s possible to playback and recording 8 channel digital In/out in same time
using this one connector.
- You can connect external devices that adapting R-BUS format from Roland. It’s
possible to playback and recording 8 channel digital In/out in same time using this
one connector.
♦ Caution – You cannot use TDIF and R-BUS format at the same time.
5. The Audioterminal 010 Interface connection port
This port is made for the upgrade in the future. Don’t connect anything in this port because there
are no functions until now.
6. 7. WORD-IN/OUT
This port is for the matching Word Clock with other audio card/device. You can set Word Clock
between other card (ex.Waveterminal 2496) and Audioterminal 010 in this port. Word Clock Out
becomes a Master Word Clock and Word Clock In will be a Slave Word Clock.
8.9. EXT-IN/OUT
This port is for the matching Digital Clock with other audio card/device. Digital Clock Out
becomes a Master and Digital Clock In will be a slave.
10. CD-ROM Digital Audio Input
Audioterminal 010 provides an on-board 2-pin port that can be used to connect directly with CD-
ROM that have 2-pin digital output port. This allows you to transfer CD digital audio directly to
your PC with ease, and you can playback and recording your CD audio with Audioterminal 010.