ESI Audioterminal 010 User Manual

Page 18

1. External Connection Cable Port

This port is connecting for the exclusive external connection cable that has 1In/1Out 16 channels

MIDI Interface and SPDIF (Coaxial) connection. This cable is provided with the Audioterminal 010.

As below picture, the cable consists of total 5 connectors. In the one side, there is an 8-pin

connector to Audioterminal 010. The other side, there are two small connectors for SPDIF digital

In/Out port and large connectors for MIDI interface In/Out. These 4 cables are labeled for

distinction.

2. Optical IN-ADAT 8 channel/ SPDIF 2 channel Input

This Optical Input port is used two different ways. You can select it on the Audioterminal 010

control panel.

You can connect from external devices supporting ADAT format (ADAT multi

channel recorder or digital mixer)’s output to this port.

You can connect from external device supporting SPDIF format (CD, MD, DAT)’s

output to this port.

3. Optical OUT-ADAT 8 channel/SPDIF 2 channel out

This Optical Output port also supports two different formats. You can select it on the Audio

terminal 010 control panel.

You can connect from this port to external device supporting ADAT format (ADAT

multi channel recorder or digital mixer)’s input.

You can connect from this port to external device supporting SPDIF format (CD, MD,

DAT)’s input.