Setup wizar d, Step 4 of 4: selecting your tv source – Entone FusionTV User Manual
Page 8
User G
U
ide
User G
U
ide
Setup Wizar
d
8
9
Setup Wizar
d
4.
Use the
ARROW KEYS
to select “
NEXT
” and then press
OK
.
5.
Select the type of security used by the wireless network, press
OK
then
select “
NEXT
” and press
OK
.
6.
Enter the network password using the remote control and the on-screen
keyboard, then select “
NEXT
” and press
OK
.
7.
The device will try to connect to the wireless network.
8.
If successful, you will see a Wireless Network Summary screen.
9.
Press
OK
to proceed to the next step.
10.
If your changes cause the network connection to drop, return to the
previous networking configuration. See the
SETTINGS
chapter (
page 73
)
for more information on this feature.
Connecting to Wired Networks (Ethernet)
1.
If your network connection type uses an Ethernet cable, choose “
Wired
”.
The Wired Network Summary screen will display the network summary for
your device. The device will automatically acquire your network information
from your router or modem.
NOTE:
If your router is DHCP enabled, then you will see Network Address Mode to be Automatic.
2.
Press
OK
to continue.
To setup the wired network manually or make changes, perform the
following:
1.
Use the
ARROW KEYS
to select “
CHANGE
” and press
OK
.
2.
Select “
Manual
” and press
OK
.
3.
Use the
ARROW KEYS
and press
OK
to select a category.
4.
Use the
NUMBER KEYS
to enter new values and press
OK
to lock in new
values.
5.
Repeat steps
3
and
4
to change other category values. Select “
SAVE
”, and
press
OK
to continue.
6.
Use the
ARROW KEYS
to select “
NEXT
” and press
OK
to proceed to the
next step.
Step 4 of 4: Selecting your TV Source
FusionTV works with your Entone device which has built-in dual or quad TV
tuners that support Antenna (ATSC) and Digital Cable TV via ClearQAM or
CableCARD connections.
NOTE:
Digital Cable TV (Clear QAM) is basic unencrypted cable that may be provided by your
local cable company or other providers of video services within your community.
CableCARD is a PCMCIA card that allows access to premium digital cable
programming. CableCARDs are available from your local cable service provider.
Only select “
None
“ if you do not intend to use the device to watch or record
HDTV from an Antenna, Clear QAM, or CableCARD cable source. If you select
“
None
“, your device will only have access to VUDU and Personal Media Content.
For Antenna or Digital Cable TV (Clear QAM) Connections
1.
Select “
Antenna
” or “
Digital Cable
” and Press
OK
.
2.
Press
OK
to continue.