Entone FusionTV - Manual (Page 47)

User G
U
ide
User G
U
ide
Set
tings
Set
tings
87 86
Delete Content
This option will permanently delete all DVR recordings or media files saved on
the hard drive.
To delete specific individual files, see below:
1. From the Main Menu select SETTINGS > RESTART & RESET > DELETE
CONTENT .
2. Select between “ DVR recording ” or all “ Media files saved on this hard
drive ”.
NOTE: If you continue, depending on your choice, all DVR recordings and/or media files will be
permanently deleted and cannot be recovered.
3. After making your choice, use the ARROW KEYS to select “ Continue ” and
press OK .
 If you want to delete individual DVR recordings, go to the Main Menu,
select “ DVR ”, “ DVR Recordings ”, select a recording from the list, and select
“ Delete Program ”.
 If you want to delete individual media files, in the Main Menu choose
between “ MUSIC ”, “ PHOTOS ”, and “ VIDEOS ”. Select a file from the available
folders then press the YELLOW button on the remote or OK to select the
file.
 Depending on the media file chosen, select “ Delete Song ”, “ Delete Photo ”,
or “ Delete Video ”.
Repeat Setup Wizard
You only need to repeat Setup Wizard if you have moved or if your video source
has changed. This will stop any in-progress recordings, scheduled recordings,
and downloads. From the Main Menu select “ SETTINGS ”, “ Restart & Reset ”,
and “ Repeat Setup Wizard ”.
Reset to Factory Default
WARNING: Resetting to factory default will erase all recordings, media content, user settings,
and channel line-ups. It will also deactivate any services, such as VUDU, from the
device.
1. From the Main Menu select “ SETTINGS ”, “ Restart & Reset ”, and “ Reset to
Factory Default ”.
2. Press OK to continue.
3. A warning message will appear to confirm that you would like to proceed.
Select “ BACK ” to exit, otherwise select “ NEXT ” to continue.
Software Update
If FusionTV is connected to the Internet, software updates can be downloaded
to your device. The device will prompt you when a new software update is
available and ask you to download and install the update.
You can also periodically check for new updates.
Software Update Using the Internet:
The easiest way to update your software is by using the Internet. A broadband
connection is required.
1. From the “ SETTINGS ” menu select “ Software Update ”, then select “ Check
For New Update ”, and press OK .
2. FusionTV will look for available updates. If an update is found, you will be
prompted to accept the update and begin the downloading process. Once
the download is complete, FusionTV will install the update and restart the
device automatically.