Entone Hydra II - Manual (Page 9)

Copyright     2007 Entone, Inc. All rights reserved
7
Chapter
1
1.1 Safety Precautions
Before installing Hydra, be sure to unplug Hydra, your TV and any other audio-video equipment you are
using. This precaution will help to prevent danger of electrical shock and damage to Hydra and your
equipment.
Be careful when moving your television to avoid accidental tipping or movements that might cause injury to
you or those around you.
To ensure proper use of this product, please read this user manual carefully and retain for future reference.
Should the unit require maintenance, contact your service provider.
OPERATION AND CARE
To prevent fire or shock hazard, do not expose this product to rain or moisture.
To reduce the risk of electric shock, DO NOT remove the cover or back. No user serviceable parts are
inside. For servicing refer to qualified personnel.
Make sure nothing is lying on any of the cables.
Be sure the cables are located where they will not be stepped on or tripped over.
Do not spill food or liquids onto the unit.
Do not push any objects into the free slots. Doing so will damage the unit. This can cause fire or
electrical shock and can short out interior components.
Keep the equipment away from heat sources and radiators.
Do not block cooling vents.
Do not place the equipment in a closed-in wall unit.
When disconnecting a cable, pull on its connector or on its strain relief loop. Do not pull on the cable
itself. Some cables have a connector with locking tabs; if disconnecting this type of cable, press in on
the locking tabs before disconnecting the cables.
When connecting a cable, make sure both connectors are correctly oriented and aligned before
connecting to avoid bending connector pins.