Entone Hydra II User Manual
Page 17
Hydra User’s Guide
Copyright
2007 Entone, Inc. All rights reserved
.
15
CONNECTING THE PRIMARY TV USING COAXIAL CABLE
1. Use the coaxial cable that comes packaged with Hydra to connect your TV’s antenna input to the
Hydra’s “TV OUT”.
2. Tune your TV to channel 10 to view the output.
NOTE: In the “TV OUT”, it is always hooked to decoder 1 and factory set to use channel 10.
Figure 4-1 Connecting Primary TV using Coaxial Cable