Entone Hydra II User Manual

Page 20

Hydra User’s Guide

Copyright 



CONNECTING THE PRIMARY TV USING COMPONENT

1. Acquire the required cable. RCA Component cables are not packaged with the Hydra. Before

purchasing the cable, consult the TV owner’s manual to confirm that the TV supports the video signal
output that you plan to use.

2. Connect the 3-color component video cables (Green, Blue and Red) and composite audio cables (Red

and White) to the Hydra.

3. Connect the opposite end of the video and audio cables to the matching input in the TV.
4. Plug in the TV and turn on the power using your TV remote control. Use the TV remote control to select

the respective video input that is connected to the Hydra. Consult your TV owner’s manual for
instructions as required.

5. Plug in the Hydra and turn on the power.
6. You should now see the output from the Hydra on the TV screen.

Figure 4-4 Connecting Primary TV using Component and Composite Audio

NOTE: All A/V outputs are always connected to decoder 1.