Echo Bear Cat SC5614 - Manual (Page 8)

5 INCH CHIPPER/SHREDDER 4
SAFETY
p/N 14942-00
7
3
READ AND uNDERSTAND
THIS OWNER/OPERATORS
MANuAl. BE COMPlETEly
FAMIlIAR WITH THE
CONTROlS AND THE PROPER
uSE OF THIS EQuIPMENT
OBTAIN AND WEAR SAFETy
glASSES AND uSE HEARINg
PROTECTION AT All TIMES
WHEN OPERATINg THIS
MACHINE.
BEFORE INSPECTINg OR
SERVICINg ANy PART OF THIS
MACHINE, SHuT OFF POWER
SOuRCE, DISCONNECT
SPARK Plug WIRE FROM
SPARK Plug AND MAKE SuRE
All MOVINg PARTS HAVE
COME TO A COMPlETE STOP.
p/N 12172
p/N 12168
1
ContaCt WIth
ROTATINg DRIVElINE
CAN CAuSE DEATH.
DO NOT OPERATE
WITHOuT All
DRIVElINE, TRACTOR AND EQuIPMENT SHIElDS IN PlACE.
ENSuRE THE DRIVElINE IS SECuREly ATTACHED AT BOTH
ENDS AND DRIVElINE SHIElDS THAT TuRN FREEly ON
THE DRIVElINE ARE IN PlACE.
p/N 12174
DO NOT OPERATE MACHINE
WITHOuT SHIElDS IN PlACE.
FAIluRE TO DO SO MAy CAuSE
SERIOuS INJuRy OR DEATH.
4
2 p/N 12169
KEEP HANDS AND FEET
OuT OF INlET AND
DISCHARgE OPENINgS WHIlE
MACHINE IS OPERATINg TO AVOID
SERIOuS PERSONAl INJuRy. STOP
AND AllOW MACHINE TO COME
TO A COMPlETE STOP BEFORE
ClEARINg OBSTRuCTIONS.
KEEP HANDS AND FEET
OuT OF INlET AND
DISCHARgE OPENINgS
WHIlE MACHINE IS
OPERATINg TO AVOID
SERIOuS PERSONAl
INJuRy. STOP AND
AllOW MACHINE
TO COME TO A COMPlETE STOP BEFORE ClEARINg
OBSTRuCTIONS.
p/N 12175
5
1.9 saFETY dEcaLs
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. decals that need replacement must be applied to their original locations.
p/N 12183
6
PRESS CluTCH
PEDAl DOWN WITH
FOOT TO DISENgAgE
BElT WHIlE STARTINg
ENgINE. SlOWly
RElEASE FOOT TO
ENgAgE CHIPPER
BElT AFTER CHIPPER
IS RuNNINg.