Echo Bear Cat SC5614 - Manual (Page 10)

5 INCH CHIPPER/SHREDDER 6
Section
Place the hopper assembly on top of the shredder 1.
frame. The tabs on the bottom of the hopper should
be placed inside the shredder frame.
Secure with eleven (11) 5/16 x 3/4" hex bolts,
2.
washers and locknuts. Insert the bolts from inside
the hopper.
Install rims and wheels onto the trailer frame using the 1.
wheel bolts supplied.
Insert the trailer hitch into the track on the bottom of the
2.
trailer frame and secure with three 3/8" bolts, washers
and nuts. Torque to 35 Ft-lbs.
2
assEmbLY
2.1 INsTaLL THE HoppER
WaRNING
If any bolts or nuts are dropped in the machine, be
sure to remove them before starting the machine.
Remove items from the shredder area by removing
the discharge screen.
2.2 INsTaLL THE WHEELs
(ToWabLE modELs)
2.3 INsTaLL cHuTE EXTENsIoN aNd
dIscHaRGE dooR
(cE compLIaNT ToWabLE modELs)
domEsTIc ToWabLE modEL
EuRopEaN ToWabLE modEL
Attach the chute extension to the chipper chute with 1.
four (4) 5/16 x 3/4" hex bolts, washers and locknuts.
Insert the bolts from inside the hopper.
Hold the discharge door in place at the back of the
2.
machine and push the pivot rod through the machine
frame and underneath the lip of the door.
Secure the pivot rod with two 5/16" nylock nuts and
3.
flat washers.