Echo Bear Cat SC5540B - Manual (Page 7)

5 INCH CHIPPER/SHREDDER 3
ENGLISH
SAFETY
P/N 14942-00
P/N 12176
7
6
3
READ AND UNDERSTAND
THIS OWNER/OPERATORS
MANUAL. BE COMPLETELY
FAMILIAR WITH THE
CONTROLS AND THE PROPER
USE OF THIS EQUIPMENT
OBTAIN AND WEAR SAFETY
GLASSES AND USE HEARING
PROTECTION AT ALL TIMES
WHEN OPERATING THIS
MACHINE.
BEFORE INSPECTING OR
SERVICING ANY PART OF THIS
MACHINE, SHUT OFF POWER
SOURCE, DISCONNECT
SPARK PLUG WIRE FROM
SPARK PLUG AND MAKE SURE
ALL MOVING PARTS HAVE
COME TO A COMPLETE STOP.
P/N 12172
P/N 12168
1
CONTACT WITH
ROTATING DRIVELINE
CAN CAUSE DEATH.
DO NOT OPERATE
WITHOUT ALL
DRIVELINE, TRACTOR
AND EQUIPMENT SHIELDS IN PLACE. ENSURE THE
DRIVELINE IS SECURELY ATTACHED AT BOTH ENDS
AND DRIVELINE SHIELDS THAT TURN FREELY ON THE
DRIVELINE ARE IN PLACE.
P/N 12174
DO NOT OPERATE MACHINE
WITHOUT SHIELDS IN PLACE.
FAILURE TO DO SO MAY CAUSE
SERIOUS INJURY OR DEATH.
PN 12174
4
2 P/N 12169
KEEP HANDS AND FEET
OUT OF INLET AND
DISCHARGE OPENINGS WHILE
MACHINE IS OPERATING TO AVOID
SERIOUS PERSONAL INJURY. STOP
AND ALLOW MACHINE TO COME TO A
COMPLETE STOP BEFORE CLEARING
OBSTRUCTIONS.
KEEP HANDS AND FEET OUT
OF INLET AND DISCHARGE
OPENINGS WHILE MACHINE
IS OPERATING TO AVOID
SERIOUS PERSONAL
INJURY. STOP AND ALLOW
MACHINE TO COME TO A
COMPLETE STOP BEFORE
CLEARING OBSTRUCTIONS.
P/N 12175
5
1.6 SAFETY DECALS
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.
DO NOT INSERT BRANCHES LARGER THAN 3/4 INCH INTO
SHREDDER OR MACHINE DAMAGE MAY OCCUR.
READ AND UNDERSTAND YOU OWNERS MANUAL BEFORE
OPERATING. IF OWNERS MANUAL WAS NOT INCLUDED OR
YOU HAVE ANY QUESTIONS, PLEASE CALL 800.247.7335
OR 701.282.5520 (U.S.A.)