Echo Bear Cat SC5540B - Manual (Page 10)

5 INCH CHIPPER/SHREDDER 6
Section
FEATURES & CONTROLS
3
5. SHREDDER CHUTE
Materials to be shredded are fed through the shredder
chute to the shredder knives.
2. CHIPPER CHUTE
Materials to be chipped are fed through the chipper chute
to the chipper blades.
6. THREE-POINT HITCH CONNECTIONS
Mount the chipper/shredder to the tractor. Connect
directly to the tractor for Category 1. Category 0 may
require 5/8" pins. A bushing kit must be installed on 3-pt.
connections for Category 2 hitches.
4. PTO SHAFT
Connects the tractor PTO to the chipper/shredder drive
shaft. Avoid an angle greater than 15 degrees up or down
when the machine is in use.
Understanding how your machine works will help you achieve the best results when using your machine. The following
descriptions define the features and controls of your machine.
1. BLADE ACCESS COVER
Remove this cover to access the chipper blades.
3. DISCHARGE DOOR
Shredded and chipped materials exit through the discharge
door to the ground.
1
2
3
4
5
6