Drake EH244 SERIES - Manual (Page 14)

CONFIGURATION (continued)
Image: EH244 Web-Server Control Panel, OUTPUT Tab
The IP Output tab allows you to configure the IP streaming configuration for the unit. The top section
configures the global settings. The unit supports both MPTS and SPTS output modes. In MPTS
mode, all channels assigned to one of the four multiplexes are output in a single IP stream; in SPTS
mode, each encoder’s output is encapsulated within its own IP stream. Select your desired mode of
operation and configure your source IP address for the IP streams. Click the top ‘Apply’ button when
finished.
(continued on Page 15)
EH244 ENCODER HOST SERIES
14