Drake EH244 SERIES - Manual (Page 13)

EH244 ENCODER HOST SERIES
CONFIGURATION (continued)
The Channels tab provides an interface to configure the virtual channel mappings for this encoder
host. If PSIP is ENABLED, this page will display a screen that looks like:
Image: EH244 Web-Server Control Panel, CHANNELS Tab
For each encoder output, the MPEG program number can be modified, along with the Major and
Minor channel numbers. If one-part virtual channel numbers are desired, the PSIP Mode must be set
to CVCT and the Minor number for each channel should be set to 0.
The Output tab provides an interface to set all modulator output settings for the unit. A screenshot of
this tab is shown in the Image on Page 14. This tab selects the DTA and EAS modes. For settings
like the DTA or EAS options, more specific options will appear as you enable the sub-systems.
(continued on Page 14)
13