Assembling the dr leaf and lawn vacuum – DR Power Walk-Behind 11.50 fpt (August 2010 - Present) User Manual
Page 9
![background image](https://www.manualsdir.com/files/781828/content/doc009.png)
CONTACT US AT www.DRpower.com 9
Hardware Bag Contents (
Figure 4 and Table Below)
ITEM# PART
# DESCRIPTION
QTY
1
143401
Nut, Nylon Lock, 1/4-20
1
2
284701
Bolt, Hhcs, 1/4-20 x 2-1/4"
1
3
149651
Washer, Fender, 5/16"
6
4
167791
Bolt, Hhcs, 5/16-18 x 3/4"
4
5
146051
Bolt, Hhcs, 5/16-18 x 1"
10
6
144181
Locknut, Whiz, 5/16-18
5
7
143131
Nut, Nylon Lock, 5/16-18
10
8
149451
Hook, Bag Hanger
3
9
154821
Eyebolt, 5/16-18 x 5"
1
10
285641
Knob, Hand, 5/16-18
4
11
145861
Cotter Pin, Hair Spring
1
12
155121
Screw, Self Tapping, 10-32 x 3/8"
1
13
155111
Lock Washer, Split, 5/16"
4
14
145151
Flat Washer, 5/16"
2
15
154801
Flat Washer, 1/4"
1
16
285631
Carabiner
2
17
285651
Label, shift Rod
1
Compare the contents of the Shipping Box, Poly Bag and Hardware Bag with
the “Contents” lists above. If you have any questions please contact us at
www.DRpower.com or call 1-800-DR-OWNER (376-9637) for assistance.
NOTE: Assembly should be done on a clean, level surface.
2. Use the utility knife to cut down the two corners one end of the Box, and
then roll the machine out (Figure 5).
Assembling the DR LEAF and LAWN VACUUM
Tools Needed:
5/16" Wrench
Two 1/2" Wrenches
Two 7/16" Wrenches
1. Position the two Lower Bag Hanger Frames onto the cross member of the
Lower Handle and loosely install with two 5/16-18 x 1" Bolts and two 5/16-
18 Nylon Locknuts using two 1/2" Wrenches (Figure 6).
2. Position the Upper Bag Hanger Frame onto the two Lower Bag Hanger
Frames with the top holes facing closer to the rear of the machine. Secure
the lower two sets of holes in the Upper Bag Hanger Frame to the Lower
Bag Hanger Frames with four 5/16-18 x 1" Bolts and four 5/16-18 Nylon
Locknuts using two 1/2" Wrenches. Tighten the Hardware you installed in
the previous step.
Figure 6
Upper Bag
Hanger Frame
Bolts and
Locknuts
Lower
Bag
Hanger
Frame
Bolts and
Locknuts
Not this
Hole
LLV
Machine
Figure 5
DO NOT try to lift the machine out of the box, it is very heavy and may cause
severe injury.
1
Figure 4
2
3
4
5
6
7
9
8
11
10
12
13
14
15
17
16