beautypg.com

To reassemble the mow-ball™ support assembly, To reassemble the mow-ball, Support assembly – DR Power Walk-Behind Pro (2000 - 2001) User Manual

Page 29

background image

DR

®

TRIMMER/MOWER

Assembly & Operating Instructions

23

To Reassemble the Mow-Ball

Support Assembly

WARNING! Before performing any maintenance procedure, the engine should be stopped

and the spark plug wire disconnected.

Caution: Improper installation may cause damage to the bearings. Please follow these
directions carefully.

1. Reassemble the components in the order shown in

Figure 37.
· The line plates stack on top of one another with

the bumps on the bottom locking into the grooves
on the top of each plate.

· The head of the Mow-Ball

bolt should sit in the

groove of the rectangular washer at the bottom of
the Mow-Ball

Support. Hold the bolt head in

place with one finger and turn the Mow-Ball

Support assembly clockwise until it's finger tight.

Figure 37