beautypg.com

Cord installation – DR Power Walk-Behind Pro (2000 - 2001) User Manual

Page 20

background image

DR

®

TRIMMER/MOWER

Assembly & Operating Instructions

14

Cord Installation

The standard cord installation method is shown in Figures 24-26. This is how your trimmer is
shipped from the factory.

1. Insert the ends of the cords into the

openings in the line plate, as shown in
Figures 23 and 24. There are different
sized arrows at the insertion points to
indicate what size cords fit the holes.

2. Push the cord through until it comes

out the center hole in the line plate as
shown in Figure 25. Adjust the cords
so the tips are even.

3. Pull the cords below the loop and push

the loop up into the groove above
them, as shown in Figure 26. Then
pull the cords tight.

Figure 24

Figure 25

Figure 26