DNF Controls UABS-I Operation_Manual User Manual
Page 6

6 of 12 Flex Control Network
®
UABS-I Operation Manual
2. SYSTEM POWERUP
On The CP20 Control Panel
A. View Playlist Screen
Press Device key “1”, in the upper left hand corner, to view the Master
Control channel’s playlist screen on the VGA.
B. Read the List of Clips from the Video Server
1) Press Device key “2” to view the Clip Review channel’s Clip Database.
The Clip Database is a copy of all clip names on the video server.
2) Press SHIFT + numeric keypad “5”. On the bottom of the CP20 VGA
“Are you sure you want to rebuild the database?” will be displayed.
3) Press numeric keypad #5 to read the list of clips from the video server
and into the UABS’s Clip Database. This will take some time.
OR, press numeric keypad #2 to cancel.
3. MASTER CONTROL CHANNEL
The Master Control Channel is used to control the on-air playlist.
The VGA, plugged into the CP20 Control Panel, displays the on-air playlist.
Four highlight bar colors are used to quickly communicate list status
information to the Master Control Operator.
A. Play the List
Press the PLAY key to start list playout at the green highlighted element.
The list of default function keys will be displayed on the bottom row of the
VGA screen.
If the current element type (highlighted green) is:
Time Trigger The “Time To Air” countdown will be displayed at the top of
the VGA screen. At the entered time, the green highlighted
element will begin to play.
Manual The
green
highlighted
element will begin to play
Follow Along The green highlighted element will begin to play
Highlight Bar Color
Status
GREEN On-air
element
YELLOW Cued
element
RED Missing
element
BLUE
Used in EDIT mode to indicate selected element.