DNF Controls SW1X8 - Manual (Page 9)

SW1X8, RS422 Switcher Page 7 7 o o f f 1 1 2 2
IX. OPERATION WITH GANG FUNCTION
A. To Control A Gang of VTRs
1. Press and hold the switch corresponding to the Status VTR (the VTR
that will be monitored for status and timecode). Its indicator will light.
2. Now press and release the switch corresponding to each VTR to be
added to the gang. Their respective indicators will light.
3. Release the Status VTR switch. It will begin to blink.
Example: To gang VTRs 2, 4, 5 and 7
Press and hold switch number [2], its indicator will light.
Press and release switch numbers [4], [5] and [7].
Their respective indicators will light.
Release switch number [2]; its indicator will blink.
B. To Control All 8 VTRs
1. Press the [GANG] switch.
2. The Switch number 1 indicator will blink (it is the default Status VTR).
All other switch indicators, 2 through 8, will light.
Example: To Gang Roll (Common Roll) VTRs 1 through 8, press GANG.
The indicator for each VTR will turn on.