DNF Controls ST60-DVC - Manual (Page 4)

4 ST60-DVCPRO
3. OPERATION
Select the desired transport function by pressing the appropriate switch on the front of the
ST60.
The Real-Time Status Indicators will light to indicate the VTR's current tape transport
mode.
For example - Pressing [PLAY] will put the VTR into the PLAY mode.
PLAY Status Indicator will light when the VTR is in PLAY mode.
The real-time Tape Counter is displayed on the LCD Display.
Loss of serial communication with the VTR is indicated by ALL Status LEDs turned ON.
4. RECORD MODE
Two (2) Record modes are available: Crash Record (Full Record), and Record Lockout.
Press only the [RECORD] switch to activate the selected Record mode.
The Record Status Indicator will turn on when the VTR begins recording.
NOTE: The VTR will not go into Record mode if "Record Inhibit" is enabled on the
VTR or tape cassette.
5. RECORD SELECTOR SWITCHES
Mode
S1 S2 S3 S4 S5 S6
Record Lockout OFF OFF OFF OFF OFF OFF
Full Record OFF ON OFF OFF OFF OFF