Digi-Star GT460 - Manual (Page 17)

Operation
OPERATION
Turn On Indicator
1. Press .
2. Press and hold to zero
balance scale if the bin is
empty.
Record Data - Automatic Mode (With AutoLog
2
)
Note: To operate GT460 with AutoLog
2
the GT460 must be connected to a
PTO speed shaft sensor. In addition, the GT460 AutoLog
2
functionality
must be turned on. Check that D.A.N. 531 is set to ON. See page 34.
1. Press to select required
field name. See page 12.
2. Press to select required
ID. See page 13.
Note: Make sure Indicator has
returned to the active screen.
3. If AutoLog
2
is enabled, simply
start the PTO. Scale will read
Zero and enter the net mode.
4. Unload grain from grain cart. The
Upper Display shows the amount
unloaded. Gross value (total
amount left on cart) is displayed
on second line of Lower Display.
5. If AutoLog
2
is enabled, simply
stop the PTO. Data record will be
stored, displayed and printed.
NOTE: If AutoLog
2
is not working correctly, see page 46 for
troubleshooting and set-up instructions.
1
2
1
2 3
0
5
4
Truck I TIME-3:33P
G- 49,340 PA-97,380
J o n e s h i l l c o r n
H E L L O
D i g i - s t a r G r a i n T r a c k e r
R e c o r d s I % f u l l
0 I 0 0
D3804 GT460 AutoLog
2
Operators Manual 17