DFI G7L330-B - Manual (Page 85)

85
3
BIOS Setup
PC Health Status
Shutdown Temperature
You can prevent the system from overheating by selecting a tem-
perature in this field. If the system detected that its temperature
exceeded the one set in this field, it will automatically shutdown. This
function will work only when you enable this function in the
Hardware Monitor utility.
Vcore, V3SB, Vcc3, Vcc5, +12V, V5SB, VBAT, Current System Temp.,
Current CPU Temperature, Current System Fan Speed and Current CPU
Fan Speed
These fields will show the output voltage, temperature and fan speed
of the monitored devices or components.
Note:
The onboard hardware monitor function is capable of detecting
“system health” conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor utility.
This utility is included in the CD that came with the system
board. Refer to the Hardware Monitor section in chapter 4 for
more information.
The settings on the screen are for reference only. Your version
may not be identical to this one.