DFI G7L330-B - Manual (Page 83)

83
3
BIOS Setup
Init Display First
This field is used to select whether to initialize the onboard VGA,
PCI Express or PCI first when the system boots.
Onboard When the system boots, it will first initialize the
onboard VGA.
PCIEx When the system boots, it will first initialize the PCI
Express x16 graphics card.
PCI Slot When the system boots, it will first initialize PCI.
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled The BIOS will not reset the configuration data.
PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version
may not be identical to this one.