DFI G7L330-B - Manual (Page 75)

75
3
BIOS Setup
Super IO Device
Move the cursor to this field and press . The following
screen will appear.
The settings on the screen are for reference only. Your version may not be
identical to this one.
KBC Input Clock
This is used to select the input clock of your keyboard. The options
are: 8MHz and 12MHz. The default is 8MHz.
Power On Function
This field allows you to use the keyboard or PS/2 mouse to power-
on the system.
Button only Default setting. Uses the power button to power
on the system.
Password When this option is selected, set the password you
would like to use to power-on the system in the
“KB Power On Password” field.
Hot Key When this option is selected, select the function key
you would like to use to power-on the system in
the “Hot Key Power On” field.
Mouse Move When this option is selected, move the mouse to
power-on the system.
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Menu Level XX
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
KBC Input Clock
Power On Function
x KB Power On Password
x Hot Key Power On
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART2 Mode Select
x UART2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
8 MHz
BUTTON ONLY
Enter
Ctrl-F1
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3