DFI G7L330-B - Manual (Page 49)

49
2
Hardware Installation
Cooling Fan Connectors
Connect the CPU fan’s cable connector to the CPU fan connector
(J8) on the system board. The chassis fan connector (J10) is used to
connect an additional cooling fan. The cooling fan will provide
adequate airflow throughout the chassis to prevent overheating the
CPU and system board components.
BIOS Setting
The “PC Health Status” submenu of the BIOS will display the current
speed of the cooling fans. Refer to chapter 3 for more information.
X
CPU fan
X
Chassis fan
4 1
Sense
Power
Ground Speed
Control
1
3
Ground
Power
Sense