DFI G7L330-B - Manual (Page 23)

23
2
Hardware Installation
4. The CPU socket comes with a cover that is attached with a
removable protective cap. The cap is used to protect the CPU
socket against dust and harmful particles. Remove the protective
cap only when you are about to install the CPU.
Protective cap
Lever
6. Unlock the socket by pushing the lever down, moving it away from
the side tab of the socket, then lifting it up.
Cover
Lift this part up
5. Lift the protective cap from the location pointed below to detach
the cap from the cover.
Lever lifted Tab
Important:
The CPU socket must not come in contact with anything
other than the CPU. Avoid unnecessary exposure. Remove
the protective cap only when you are about to install the
CPU.