Chapter 1 - introduction, Specifications, Introduction – DFI SR100-L20C User Manual
Page 8

1
8
Introduction
Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
IDE
Rear I/O
Chapter 1 - Introduction
Specifications
• Intel
®
Celeron
®
M 550 2.0GHz 1MB cache mobile processor
(bundled with board)
- 533MHz system data bus
• Processor socket: mPGA478P
• Intel
®
chipset
- Intel
®
GLE960 Express chipset
- Intel
®
82801HBM I/O Controller Hub (ICH8M)
• One 200-pin SODIMM socket
• Supports 533MHz DDR2 SDRAM
• Supports maximum of 2GB system memory
• 1 PCI slot for PCI expansion card or customized riser card for
1, 2 or 3 PCI slots expansion
• Internal graphics feature
- Mobile Intel
®
Graphics Media Accelerator X3100
- Dynamic Video Memory Technology 4.0
- Microsoft DirectX 9x
- OpenGL 1.5
• Integrated graphics interface
- Analog CRT
- 400MHz GFX render
- Analog monitor supports up to QXGA (2048x1536@60Hz)
- DVI (supports DVI-D signal only)
- DVI 1.0 support for external digital monitor
• Realtek ALC262 2-channel High Definition Audio
• Two 24-bit stereo DACs and three 20-bit stereo ADCs
• S/PDIF input/output interface
• One Realtek RTL8111B PCI Express Gigabit controller
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
• Three Serial ATA por ts, compliant with SATA 1.0a
specification
• Data transfer rate up to 3Gb/s
• Supports Advanced Host Controller Interface (AHCI)
• Supports up to two IDE devices
• Supports Ultra ATA 100/66/33
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 2 DB-9 serial ports
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal only)
• 1 RJ45 LAN port
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line out jacks