DFI SR100-L20C - Manual (Page 65)

65
3
BIOS Setup
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
Item Help
Menu Level XX
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Onboard LAN 1 Control
Onboard LAN Rom Control Auto
Disabled
Onboard Device
Move the cursor to this field and press . The following
screen will appear.
Onboard LAN 1 Control
This field is used to enable or disable the onboard LAN chip.
Onboard LAN Rom Control
Enable this field if you wish to use the boot ROM (instead of a disk
drive) to boot-up the system and access the local area network
directly.
If you wish to change the boot ROM’s settings, type the and
keys simultaneously when prompted during boot-up. Take
note: you will be able to access the boot ROM’s program (by typing
+ ) only when this field is enabled.