DFI SR100-L20C - Manual (Page 71)

71
3
BIOS Setup
Power Management Setup
The Power Management Setup allows you to configure your system
to most effectively save energy.
The settings on the screen are for reference only. Your version may not be
identical to this one.
PCI Express PME
This field is used to configure the PCI Express PME..
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Soft-Off by PWR-BTTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec. Regardless of whether the Power Management func-
tion is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this func-
tion is to prevent the system from powering off in
case you accidentally “hit” or pushed the power but-
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level X
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
PCI Express PME
ACPI Suspend Type
Soft-Off by PWR-BTTN
Wake-up By PCI Card
Power On By Ring
x USB KB/MS Wake-up From S3
Resume By Alarm
x Date(of Month) Alarm
x Time(hh:mm:ss) Alarm
Disabled
S1(POS)
Instant-Off
Disabled
Disabled
Disabled
Disabled
0
0 : 0 : 0