DFI NP101-D16C User Manual
Page 76
76
3
BIOS Setup
Hot Key Power On
This field is used to select a function key that you would like to use
to power-on the system.
Onboard Serial Port 1 and Onboard Serial Port 2
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3
Allows you to
manually select an I/O address for the onboard se-
rial port.
Disabled
Disables the onboard serial port.
PWRON After PWR-Fail
Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.
On
When power returns after an AC power failure, the
system will automatically power-on.
Former-Sts
When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the system’s power is off when
AC power failure occurs, it will remain off when power
returns. If the system’s power is on when AC power
failure occurs, the system will power-on when power
returns.
W83627DHG.WDT Time
This field is used to select the time interval of the Watchdog timer. If
the system hangs or fails to function, it will reset at the set time
interval so that your system will continue to operate.