DFI CD102 Series - Manual (Page 16)

www.dfi .com
16
Chapter 2 Hardware Installation
Chapter 2
Backlight Brightness Power Select Panel Power Select
1-2 On: +12V
3-4 On: +5V
5-6 On: +3.3V
(default)
2
6
4
5
3
1
2
5
3
1
6
4
2
5
3
1
6
4
JP12
1 3 2
1 3 2
1-2 On: +5V
2-3 On: +3.3V (default)
JP10 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP10 match
the LCD panel’s specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
JP10
JP12 is used to select the power level of backlight brightness control: +5V or +3.3V.
Important:
Before powering-on the system, make sure that the power settings of JP12 match the
power specification of backlight control. Selecting the incorrect voltage will seriously
damage the backlight.