Devolo dLAN TV Sat PC - Manual (Page 34)

Configuration
|
|
devolo dLAN TV Sat PC
|
34
b
Scan channels
b TV settings
b
Recording settings
b Program Guide settings (EPG)
b
Display and audio settings
To reach the settings screen, press the Menu button of the quick menu on the
bottom edge of the CyberLink TV Enhance screen or on the devolo remote con-
trol. From the context menu, select Menu, then press the Settings button. The
most important options can also be defined using an installation wizard.
Remember to save your changes to the setting using the Apply button in the
button menu on the left side of the setup screen before you exit the TV settings
submenu.
4.4.1 The Setup Wizard
When you start CyberLink TV Enhance for the first time or call it up manually via
Menu
! Menu ! Settings ! Run Setup Wizard, the Setup Wizard is called
up, which prompts you to enter the most important settings for receiving digital
satellite programs:
ᕡ Display format: Here, select your monitor's aspect ratio (4:3 Normal or
16:9 Widescreen).
ᕢ Speakers: Using a drop-down menu, you can select the kind of audio play-
back you want. Select the number of speakers connected (e.g. 6 speakers
for a 5.1 surround system) or Headphones or SPDIF (for digital output to a
corresponding device).
ᕣ Location: Enter the country where you are located. This information is used
to determine which satellites are available, for instance.
ᕤ Storage location for recordings: By default, TV Enhance stores the pro-
grams it records (TV or radio) in this folder: Documents and Settings !
! My Documents ! My Videos ! Recorded TV. Alter-
natively, you can select your own target folder.
ᕥ Channel scan: The devolo dLAN TV Sat PC is displayed as DVB-S TV device
1 (dLAN TV Sat (Tuner)). You can now scan for channels by clicking the
corresponding button. Alternatively, you can do this later using the settings
menu. For the search, enter the number and name of the satellites that you
want CyberLink TV Enhance to search for channels.