Devolo dLAN TV Sat PC - Manual (Page 33)

|
Configuration 33
|
devolo dLAN TV Sat PC
|
You will need the 16-character Security IDs of the various adapters from the
label on the housing. Enter the code without hyphens in the 4 text box and con-
firm by clicking Define password. If a security ID is correct and the device is
reachable in the dLAN, the device is added to the list of already configured
adapters.
When launching the dLAN Configuration Wizard again after a successful initial
installation—when integrating a new adapter into the network, for example—
the application will remember devices and security IDs entered in previous
sessions if you have encrypted them with a personal network password or the
default password. In this case, you do not need to enter the devices again.
However, if the random password was used to encrypt the network during the
last installation, if you want to integrate a new adapter into the network, you
must re-register all previously entered dLAN adapters using the security ID.
Once you have entered the security IDs of your dLAN adapters, your dLAN net-
work is complete. All computers and other network devices connected to the
adapters by cable should now be able to communicate with one another in the
network.
4.4 Setting up CyberLink TV Enhance
You can configure the various settings of CyberLink TV Enhance using the fol-
lowing dialogues: