Devolo dLAN TV Sat PC - Manual (Page 11)

|
Quick start for Windows 11
|
devolo dLAN TV Sat PC
|
2 Quick start for Windows
Follow the steps listed below to quickly set up the devolo dLAN TV Sat PC in the
following standard environment:
b
Satellite antenna with an LNB, pointed to Astra 19.2° East
b
Connection via the power grid with the dLAN TV Sat Tuner and a devolo
dLAN 200 AVeasy adapter (dLAN default password "HomePlugAV").
b
PC with the operating system Windows Vista (32/64 bit) or
Windows XP (32 bit)
This configuration is just an example of one of many options. If you want to set
up your dLAN TV Sat PC in another environment or have problems with one of
the steps described here, refer to the two following chapters for additional
details about the corresponding point.
At the installation location of the satellite antenna
ᕡ Install the satellite antenna at a suitable location so that the LNB is pointed
to the Astra satellite 19.2° East.
ᕢ Connect the satellite antenna to the antenna input (Antenna) of the dLAN
TV Sat Tuner using a coaxial cable with F-connector.
ᕣ Connect the network cable of the power supply to the LAN jack of the tuner
and the power cable (DC connector) to the power input (DC IN 12V 1.5A)
of the tuner.
ᕤ Plug the power supply of the dLAN TV Sat Tuner into a power outlet.
At the location of the computer
ᕥ Plug the dLAN 200 AVeasy adapter provided (starter kit only) into a power
outlet close to the computer. Connect the computer and the dLAN adapter
to each other using the Ethernet cable (starter kit only).
ᕦ Put the product CD of the dLAN TV Sat PC into the computer's CD/DVD drive.
ᕧ First, install the driver software for the adapter, then install the CyberLink TV
Enhance program. To do so, simply follow the prompts of the installer.
ᕨ Start the CyberLink TV Enhance application by double-clicking the newly cre-
ated link on the desktop.