Devolo dLAN 500 AV Wireless+ - Manual (Page 68)

Network configuration 67
devolo dLAN 500 AV Wireless+
6.5.5 WLAN time control
Synchronisation with an Internet time
server has to be ensured in order to use
WLAN time control. In this case, the
time server (Device configuration
ı
Date and time ı Obtain date and time au-
tomatically) for the
dLAN 500 AV Wireless+ has to be ena-
bled and an active Internet connection
is also required 6.4.4 Time server). The
time server is enabled by default.
To be able to use the WLAN time control, enable the
option Enable time control. The time control auto-
matically switches your wireless network on and off at
certain times of the day.
You can define two time periods during which your
wireless network is to be enabled for each weekday.
Then the time control automatically switches the wire-
less network on or off.
Keep in mind that, as long as the
dLAN 500 AV Wireless+ registers con-
nected stations, the wireless network
remains enabled. The wireless network
is not switched off until the last station
has logged off.
Manually switching the access point on
or off (i.e. using a button) always has
priority over automatic time control.
The configured time control would
take effect automatically during the
next defined time period.