Devolo dLAN 500 AV Wireless+ - Manual (Page 23)

22 Initial use
devolo dLAN 500 AV Wireless+
WLAN
b
Off: The LED does not light up. The WLAN con-
nection is disabled.
b Green flashing and illumination behaviour:
ć The LED lights up when connected to the
WLAN network at 2.4 GHz.
ć The LED flashes at quick, regular intervals
when data is being transmitted.
ć The LED flashes briefly during WPS pairing.
b Blue flashing and illumination behaviour
ć The LED lights up when connected to the
WLAN network at 5 GHz.
ć The LED flashes at quick, regular intervals
when data is being transmitted.
ć The LED flashes briefly during WPS pairing.
Ethernet
b
Off: The LED does not light up.
Check all of the cable connections and check
if the connected network components are
disabled.
b Green: Lit steady when a connection to the Ether-
net network exists; flashes when data is being
transmitted.
4.3.2 Buttons
ON/OFF
Use the ON/OFF button to switch the WLAN function
on or off.
Make sure that the WLAN function in
the factory defaults is enabled and the
WLAN encryption is set to WPA2. The
default WLAN key is the Wi-Fi key of