Devolo dLAN 500 AV Wireless+ - Manual (Page 25)

24 Initial use
devolo dLAN 500 AV Wireless+
with each other, and from now on exchange
changes to the Wi-Fi configuration auto-
matically with each other.
If you want to use the
WiFi Move Technology function also
with older dLAN 500 AV Wireless+
adapters, please update the firmware
via the configuration interface of the
dLAN 500 AV Wireless+ or by using the
software dLAN Cockpit. More informa-
tion can be found in Chapter 6.6.4 Up-
date firmware and 5.3 dLAN Cockpit.
For more information on the
WiFi Move Technology, refer to Chapter
6.5.7 WiFi Move Technology.
Reset
The Reset button (on the side of the housing) has two
different functions:
b The device restarts if you press the Reset button
for less than 10 seconds.
b To change the configuration of the
dLAN 500 AV Wireless+ back to the factory
defaults, press the Reset button for more than
10 seconds. Keep in mind that all settings that
have already been configured will be lost!
You can use the tip of a drawing pin to press
the reset button.
4.3.3 Network jacks
The three LAN ports can be used to connect computers
or other network devices to the