Dataprobe iBoot-G2 Cloud Service Setup Guide - Manual (Page 4)

V1.0 iBCS.Beta.Setup.Guide Page 4
5. Control Power from the Cloud
The status screen will detail all the iBoots
registered with the cloud. You can add
locations and group iBoots by location.
Each iBoot displays the power status for all
outlets and AutoPing and Heartbeat if
configured.
Click on the box that holds the Activation Code for the device you just
entered. A modal box will appear with options to rename the device, move
the device to a defined location or delete the device.
Give the device a name, and Click Rename Device.
The remainder of the modal is very similar to the iBoot web page.
For the iBoot-G2, select Power ON, Power OFF or Cycle Power.
For the iBoot-G2+ select the desired power outlet with the checkboxes
first, then Power ON, Power OFF or Cycle Power to control that outlet.
iBoot-G2+ Shown