Dataprobe iBoot-G2 Cloud Service Setup Guide - Manual (Page 3)

V1.0 iBCS.Beta.Setup.Guide Page 3
When complete

The unit will reboot and turn back on.

The iBoot Cloud Firmware will retain the iBoots network setting.

All other setting will revert to Factory Default.
Confirm successful upgrade with DMU.

Discover to view the current firmware of the iBoot. It should match the cloud version.
If Upgrade Fails

Click OK to the failure message and Repeat Step 4.

Discover will identify the iBoot as “Recover iBoot-G2”
3. Enable Cloud Services on iBoot
Log into the iBoot with Administrator rights
Go to the Network Setup page
Click on the checkbox Enable Cloud Services:
Within 30 seconds, an 8 character activation code
will be available.
This code is also a hotlink to the Cloud Service.
4. Register iBoot with Cloud Account
Click on the Activation code to register the iBoot
with the Service.
You will be re-directed to the Service. Log-in
with your account and the iBoot will be
automatically registered with your account.
Alternatively, you can log in to the Service and
click on Add Device and enter the activation
code in the field provided
Congratulations. You are now on the cloud.