Daktronics Display Studio Scripting Button Script Commands - Manual (Page 5)

DD2296526 Page 5 of 12
Date: 18-May-2012
To complete this action: Follow these steps when creating the script:
Step 3: Select Display Script Step 4: See Below
Set dimming level for the
selected sign
Set Dimming
Set Dimming:
Manual
Photo Cell
Scheduled
Astronomical
Set gamma value for the selected
sign
Set Gamma
Set Gamma Level:
Set Gamma Mode (drop-down)
Set Gamma Value
Send the appropriate calibration
file to the selected sign
Send Calibration File
Select Sign Face:
Select Sign Face
DMP-7000 Video Processor Control Scripts
The following table details the different types of DMP-7000 Video Processor Control Scripts which may be created
in Display Studio. For each type of script, the table describes that script’s purpose, and shows the required steps
and available options for each step.
Step 1: Select Script Type  DMP-7000 Video Processor Control
Step 2: Select Device(s)
To complete this action: Follow these steps when creating the script:
Step 3: Select Video
Processor Script
Step 4: See Below Step 5: See Below
Set input for video signal Set Input
Set Video Processor Input:
Composite
S-Video
Component
SDI
VGA
Select Video Processor
and Channel:
Video Processor Number
Video Processor Channel
Designate key color for
video signal
Set Key Levels
Set Video Processor Key
Levels:
Red
Green
Blue