Daktronics Remote Control System RC-100 - Manual (Page 34)

28 DataMaster Applications
Display Action
N= number of clients
The LCD will show how many clients are found. If the
key is pressed, this is the number that the
console will use for showing error messages if all
expected clients did not respond.
If the key is pressed, the LCD will toggle between
the two screens shown at left. The detect client function
can be retried by pressing or canceled by
pressing .
Set Time 12HR
Select SET TIME 12HR to set the time as well as the date.
Display Action
Press to set the time of day or press
to exit the menu.
Use the number pad to edit the time.
Press the down arrow key <

> to set AM or PM.
Press when finished.
MM = current month value
DD = current day value
YY = current year value
Use the number pad to edit the month, day, and year
values; press to accept each value.
Before the time and date are sent to the display, the
LCD will toggle between the two screens shown at left.
If the values are correct, press to confirm.
CLI ENTS FOUND N
I S THI S CORRECT?
CHECK POWER ON
CLI ENT AND RETRY
ENTER TO RETRY
CLEAR TO EXI T
SET TI ME 12HR
ENTER TO EDI T
SET TI ME 12HR
12:OO* PM }
SET TODAYS DATE
MM*/DD /YY
9/26/12
ENTER TO SEND
TI ME- 11:35 AM
ENTER TO SEND