Daktronics Remote Control System RC-100 - Manual (Page 32)

26 DataMaster Applications
Display Option 1-5 (Lottery Displays Only)
Select a DISPLAY OPTION to set the position of the decimal for each lottery display line.
Display Action
L = current line
Press to set the display option or press
to exit the menu.
L = current line
The current configuration is shown on the bottom line of
the LCD. Press the down arrow key <

> to select one of
the following values:
$000 (default)
$00.0
$0.00
Note: If the wrong configuration is selected for the display
being used, the value may not be displayed correctly.
Press when finished.
A screen will appear asking to confirm the selection.
Press again to update the display option.
Display Status
Select DISPLAY STATUS to view information about the display.
Display Action
Press to get the display status or press
to exit the menu.
Press again and the LCD will show the
following display status items:

Driver Firmware Version

Current Day/Time

Last Reset Time

Current Temp

Temp Sensor Offset

Dimming Level

Dimming Mode

Temp Sensor Status

Light Sensor Status

COM1 Device

Timing Reference
Press to return to normal operation, or press
to access two additional display settings:
Display Passcode and Detect Clients.
DI SPLAY OPTI ON L
ENTER TO EDI T
DI SPLAY OPTI ON L
$ OOO }
DI SPLAY $ OOO
ENTER TO UPDATE
DI SPLAY STATUS
ENT TO SELECT
DI SPLAY STATUS
GET STATUS?