Led error diagnostics – Daktronics Remote Control System RC-100 User Manual
Page 19
RC-100 Base Station
13
5
CAN TX
Green
This LED flashes when Controller Area Network (CAN) data
is transmitted to a connected device.
6
CAN RX
Red
This LED flashes when Controller Area Network (CAN) data
is received from a connected device.
LED Error Diagnostics
The CL/RS232 TX, CL/RS232 RX, IN RANGE, and CAN TX LEDs are also used to display
errors that can occur in wireless Base Station operation. Refer to Section 9 for more
information about these errors.