Daktronics Remote Control System RC-100 - Manual (Page 29)

DataMaster Applications 23
Automatic
If AUTOMATIC dimming is selected, the following will be shown on the LCD:
Display Action
Press to edit the auto dimming max intensity.
This is the maximum intensity that the display will use in
full-bright modes (during daylight hours.)
Press to cancel and keep the current auto
dimming maximum setting.
NN = Current intensity (1-16)
Max intensity = 16
Press the up or down arrow keys <

> to modify the
maximum intensity of the display (Note: The DataMaster
must be connected to the display.)
Press to accept this intensity.
Manual
If MANUAL dimming is selected, the following will be shown on the LCD:
Display Action
NN = Current intensity (1-16)
Max intensity = 16
Press the up or down arrow keys <

> to modify the
current intensity of the display (Note: The DataMaster
must be connected to the display.)
Press to accept this intensity.
Blank Sign
Display Action
Press to blank the sign or press to
resume normal operation.
To resume normal operation from a blanked sign, press
the key again. Press to restart or
press to return to the menu without restarting
the sign.
SET AUTO DI MMI NG
MAX I NTENSI TY?
I NTENSI TY NN {}*
ENTER TO SET
I NTENSI TY NN {}*
ENTER TO SET
BLANK THE SI GN?
YES
RESTART SI GN?
YES